CONTACT US

If you need, please contact us in time!

Contacts:Ms Annie Shi

Telephone:+86-519-88908088

Mobile:+86-15861862227

Address:No.68 Shunhe Road, Jiaoxi Zhenglu Town, Changzhou City 213116, Jiangsu,China

Fluidized bed dryer

FG Fluid Bed Dryer

More

Detailed description

Description

1. Application

Fluid-bed dryer is mainly for the mixing of powder material, drying in pharmaceutical, food, chemical, agricultural and sideline product processing industries, such as tablet, instant powder and condiment granules. The process of feeding and discharging material for this equipment should be finished in the sealed space to avoid the powder spreading to the working environment. It‘s controlled by PLC. The finished products from wet-type granulator should be transferred with enclosed method to fluid-bed for drying by negative pressure or air-blasting.

The inlet airflow from the bottom up will push the material in the trough to move upward. As with a certain angle of the trough, the aggregative fluidization of the material in it is very intense.


Introduction of drying chamber system.

The drying chamber system is composed of a cone material tank and diffusion chamber, top bag filter chamber, the processing flow from the material tank bottom through the airflow distribution board, mesh into the equipment, when the inlet air velocity is higher than the object of gravity, can make the material from container to form a vortex movement ( fluidized bed ) 


1. The bottom-up air flow promotes the upward movement of materials in the trough, and at the same time, due to a certain angle of the container, to ensure the material in the trough in the flow of the fluidized state is very strong.



The material enters the diffusion chamber with the push of the air flow. Due to the space ratio of the diffusion chamber. The space of the trough is large, so the air flow rate in the diffusion room is lower than the material tank. As a result, it is spreading

The particle velocity of indoor material decreases. When the weight of the material itself overcomes the push of the air flow from the bottom up Force, the material particles fall, back to the groove of the edge area. In the whole production process, the material in the trough and the diffusion chamber moves up and down, forming irregular fluidized state.



Prev:FL Fluid Bed Dryer/Granulator

Next:GFG Fluid Bed Dryer

*Message:
*Name: Phone: *Email: *Verification Code:
Online Service

Focus on us