Detailed description

SXG series rotating flash dryer is developed by our company, and its technology is based on advanced technology adored. The machine includes many superiority, such as reasonable design, compact structure, widely utilization, great productive capacity, good quality, high effect and save energy, drying, grinding and sieve are completely in one equipment in once time. It eliminates pollution and the technology is reached international advance level. Flashing drying machine has the original bearing induction cooling (water cooling), oil pump design with connection to send oil lubrication. Cooling the bearing, seal performance, on the spindle design USES a half ring, motor using speed regulation, smooth transmission, low noise, the service life is ten times of similar products.

Principle of work:

The hot air enters the bottom of the in tangent direction. Under the driving of the stirrer, a powerful rotating wind field is formed. The paste state materials enter into drier through the screw charger. Under the powerful function of the stirring vanes at high speed rotation, the materials are distributed under the function of strike, friction and shearing force. The block state materials will soon be smashed and contact the hot air fully and the materials are heated and dried. The dried material after the dewatering will go up with the heater flow. The step rings will stop and keep the big particles. Small participles will be discharged out of the dryer from the ring center and will be restored by the whirl separator and dust remover. The not fully dried or big piece materials will be sent to the wall of the equipment by centrifugal force function and be smashed again after they fall down to the bottom.

Features: 

* The machine combines the whirl technology with the rotating flow, ejection, and smashing step technologies.

*The equipment is compact and small in size, high in production efficiency and continuous in the production. It has realized “small equipment can perform the large production”

*The drying capacity for this machine is big but its energy consumption is low. Its heat efficiency can go up to more than 70%.

*The material stay time is very short. The quality of the final products is very good. The machine can be used for drying the heat sensitive materials.

*For the negative pressure or the micro-negative pressure operation, the machine is good for its tightness and high in the efficiency so as to eliminate the environmental pollution.

Prev：SXG series rotating flash dryer

Next：No Next